Numerical site assessment

Measurement is costly and usually limited to a small local area, whereas numerical methods for the analysis of wind conditions fully map a site. In simple terrain, the wind atlas method can be used, but in complex terrain ­– wooded, hilly, or mountainous – this method displays local weaknesses. This is where computational fluid dynamics comes in.

A key factor in the success of a wind farm is the correct assessment of the site. If there are insufficient measurements or if the terrain is too complex, numerical simulations are ideal for predicting the potential yield. Long-term data with temporal resolution can be obtained from mesoscale simulations based on analyses of global weather models.

Wake effect of a wind farm in front of a forested hill

To determine local effects, however, computational fluid dynamics is used. This allows for the details of the terrain and the local conditions to be taken into account. For these simulations, Fraunhofer IWES uses the open code OpenFOAM. It has the advantage of being parallelizable, allowing even large areas to be simulated with ease; even transient simulations are possible.

The open code enables simulation conditions to be precisely adapted to the requirements of the atmospheric simulation. For example, in addition to a mesh generator, Fraunhofer IWES has developed tools to generate wake models for wind farms (generation of wooded areas from image files, consideration of stable and unstable stratifications) and implemented them in the code. Linking the mesoscale simulations with the local (microscale) simulations is currently under development.

TerrainMesher

TerrainMesher-generated structure for the simulation in complex terrain

A number of add-ons have been developed for site assessment: for example, a mesh generator for complex terrain and the simulation of entire wind farms. The meshes, using which numerical simulations discretize the space, are vastly important to the result of the simulations. Fraunhofer IWES offers a structured mesh generator for site simulations, which is freely available to download. In the meantime, many functionalities have been added to the tool, one important one being that any 2D meshes can be used as the base mesh. They do not necessarily have to be structured, as the mesh generator is no longer based on blockMesh – hence its name “terrainMesher”. One part of the base mesh is first projected onto the terrain in STL format. Fraunhofer IWES offers a terrainMesher for site simulation:  

https://github.com/jonasIWES/terrainBlockMesher

 

Then the rest of the mesh is dynamically relaxed, which prevents excessive discontinuities and thus improves the resulting cell quality. The resulting 2D mesh is expanded to a 3D mesh of a given height. The user can set the height of the first cell via either the base or the desired grading. This is outwardly adjusted so that the maximum aspect ratio is not exceeded. The vertical splines are also dynamically optimized so that they stand orthogonally on the terrain and maintain maximum distance from one another.

Based on the wind farm optimization code from Oldenburg University “FLaP” and the open field equation solver “OpenFOAM”, Fraunhofer IWES has developed the wind farm optimization software “flapFoam”. It projects the wakes of individual turbines into a simulated or modelled wind field. The wind farm is then laid out according to the best possible result on the basis of various optimization criteria and methods.

In addition to various wake models, the program also has the ability to compute the wakes of the individual wind turbines using CFD. The code is at an advanced stage of development.

 

Efficient power monitoring with dynamic power curve

Stochastic methods provide a broad range of analysis for an environment characterized by an incoming turbulence. In collaboration with ForWind at the university of Oldenburg, Fraunhofer IWES promotes these methods, e.g. CTRW wind field model, continuous time random walk model as well as the dynamic power curve for power monitoring. A main method is the analyses of noise profiles. Different sources of noise and deterministic dynamics can be separated in a signal. This process can be applied on all kinds of data, which are influenced by deterministic and random parts.

The dynamic power curve is a quick and cost effective method to monitor the power output of wind turbines and whole wind farms. The software is based on stochastic examination method, which enables the user to determine a turbine´s power curve in only a few days by using hub anemometer and power output data. The generated data provide an overview of the wind turbine functionality for manufacturers, operators, service companies and public utilities. Deviating behavior of same type turbines is reliably detected, so that improvements of turbines and wind farms result in a reduction of yield losses.

The continuous time random walk (CTRW) model


The base of a realistic load calculation for wind turbines is a good model of the incoming wind field. However, wind field generators based on Gaussian distributions have problems to reproduce the correct distribution of changes in wind speed compared to real wind fields. In contradiction to the model, a realistic wind field comprises a large amount of incidences and its peak wind speeds outstrip the calculated Gaussian prediction by far. The “continuous time random walk” (CTRW) model is able to generate correlated wind fields with realistic conditions. In collaboration with ForWind at the university of Oldenburg, Fraunhofer IWES offers a wind field generator based on the CTRW method.

Fraunhofer IWES uses primarily the open source code OpenFOAM or the derivative FOAMextended for CFD simulations. Even though the code is open, it is quite challenging to understand the program and apply it efficiently. Fraunhofer IWES offers OpenFOAM courses for users with different levels of knowledge:

  • Introductions to OpenFOAM
  • Courses for the use of OpenFOAM in site assessment or aerodynamics
  • Courses on programing in OpenFOAM

2016

Development and application of a grid generation tool for aerodynamic simulations of wind turbines
Rahimi, H.; Daniele, E.; Stoevesandt, B.; Peinke, J.
(Journal article)

Wind engineering 40 (2016), Nr.2, S.148-172

Link Fraunhofer Publica

2015

Combined structural optimization and aeroelastic analysis of a Vertical Axis Wind Turbine (Conference contribution)
Roscher, B.; Ferreira, C.S.; Bernhammer, L.O.; Madsen, H.A.; Griffith, D.T.; Stoevesandt, B.

American Institute of Aeronautics and Astronautics -AIAA-, Washington/D.C.:
33rd Wind Energy Symposium 2015. Vol.1 : Kissimmee, Florida, USA, 5 - 9 January 2015; held at the AIAA SciTech Forum 2015
Red Hook, NY: Curran, 2015

S.333-342

Link Fraunhofer Publica

The impact of wake models on wind farm layout optimization (Conference contribution, journal article)
Schmidt, Jonas; Stoevesandt, Bernhard

Journal of physics. Conference series 625 (2015), Art.012040, 10 S.

Link Fraunhofer Publica

Numerical investigation on tower effects for downwind turbines (Abstr.); Stoevesandt, B.; Habib, F.; Mehra, B.; Rahimi, H.; Peinke, J.

UL International GmbH, Wilhelmshaven:
DEWEK 2015. Book of abstracts : 12th German Wind Energy Conference, 19/20 May 2015, Bremen, Germany
Bremen, 2015
S.90

Link Fraunhofer Publica

Roof region dependent wind potential assessment with different RANS turbulence models (Journal article)
Toja-Silva, F.; Peralta, C.; Lopez-Garcia, O.; Navarro, J.; Cruz, I.

Journal of wind engineering and industrial aerodynamics 142 (2015), S.258-271

Link Fraunhofer Publica

Wind farm layout optimization in complex terrain with CFD wakes (Conference contribution); Schmidt, J.; Stoevesandt, B.

Paper presented at EWEA 2015, Europe's Premier Wind Energy Event, 17 - 20 November 2015, Paris, France

Link Fraunhofer Publica

Wind power energy in Southern Brazil: Evaluation using a mesoscale meteorological model (Journal article & Conference contribution)
Krusche, Nisia; Peralta, Carlos; Chang, Chi-Yao; Stoevesandt, Bernhard

Energy Procedia 76 (2015), S.164-168

Link Fraunhofer Publica